Welcome To Premier Handling Solutions! 1-800-404-2311

SPACECARE Workbench Stepdown Caster

- 17%

$34.00

Materials and Colors
MATERIAL

Steel

Specification
Manufacturer

‎SPACECARE

Part Number

‎SPWC002

Item Weight

‎6.74 pounds

Product Dimensions

‎5.5 x 1.75 x 6.3 inches

Is Discontinued By Manufacturer

‎No

size

‎Workbench Caster Set of 4

Style

‎Caster Set of 4

Special Features

‎Swivel

Batteries Included?

‎No

Batteries Required?

‎No

(8 customer reviews)
Product is rated as #18 in category Caster Wheels
Add to wishlistAdded to wishlistRemoved from wishlist 0
  • 【DURABLE CONSTRUCTION】- The heavy duty wheel casters, constructed with durable solid steel and premium urethane wheels, which can move smoothly and easily support up to 600 lbs per set. The wear-resistant urethane wheels can work smoothly for heavy duty workbenches Tables and Equipments.
  • 【EASY OPERATION】- It just takes one foot to lift workbench table and equipment. Step on the pedal then lift the workbench to an fixed height. Pay attention NOT to step on the edge of outer side, just put your foot at the middle point of pedal(see image 5). The casters cannot work on rocky road, but it works well on smooth road.
  • 【360-DEGREE MANEUVERABILITY】- Equiped with 360-degree swivel bracket, the wheel can turn to any directions. Move the workbench, table, cabinet and equipment to the destination more easily and flexibly.
  • 【MOUNTING SCREWS INCLUDED FOR EASY INSTALLATION】- We offer 16 screws that is enough for installation, but it depends on you whether to install 24 screws or not. Better to make holes in workbench legs with a driller(not included) before installing casters.
  • 【ANTI-SLIP PEDAL】- The pedal is framed with powder coating and satin black finish, marked with anti-slip stripes on its surface which means anti-rust and more durable for use. Equipped with the wear-resistant urethane wheels can work easily.

8 reviews for SPACECARE Workbench Stepdown Caster

3.5 out of 5
3
2
1
0
2
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Arif Ali

    Great product and very easy to install. Exactly what I was expecting. Very easy to use.

    Helpful(0) Unhelpful(0)You have already voted this
  2. Amazon Customer

    I am using it to move around my Tablesaw within my limited space shop. When not in use, I can wheel it easily to the corner and when needed, out to middle of space, drop posts down to the floor and the table saw base becomes rigid in the room. . Works great. Too bad I waited so long to do this, should have been years ago.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Steven H. Hulme

    Like many American consumers, I have more “stuff” than I have space for. For years, a radial arm saw that I inherited from my father has sat in the corner of the garage, because it was too heavy and unwieldy to move around. These wheels have given it a new lease on life, as I’m able to keep it in the corner, then roll it out to the open space for use, then roll it back out of the way for storage.

    This kit comes with hardware to screw onto wooden bench legs, but the saw is mounted on a rectangular steel stand. So, the first thing I did was go to the hardware store and buy 16 screws and nuts (10-24 x 3/4) and 16 fender washers – 4 for each wheel. I drilled the holes and installed the brackets (used thread locker to keep the nuts in place), then screwed the wheels on. The whole job took maybe 45 minutes; the most difficult part was laying the saw down on its back to do the work. (Heavy!) I stood it back up and rolled it around – it works. (On asphalt! Once it’s in the garage with that smooth concrete, it’ll work even better.)

    It looks sturdy enough. The brackets are metal, the wheels are good-quality hard rubber of some kind, with ball bearings. I expect it will outlast me. I’m a “hobbyist” type tool user; these might not stand up to day-after-day professional heavy-duty use… but the price was right and a small price to pay for better usage of my limited amount of square footage.

    Tips:
    – There are six holes on each bracket for mounting to your bench or tool. I elected to use four… drilled the bottom set of holes 1 3/8 inches from the bottom. If I had it to do over, I’d drill the holes at 1 1/2 inches.
    – Keep in mind that these add 12 inches to the total width of whatever they’re mounted on (with wheels lowered).
    – They come with screws for mounting to wood or sheet metal. I opted for machine screws and nuts/washers, which I supplied myself.
    – The kit comes with some instructions. (I didn’t even look at them, except for how high off the ground they should be mounted.)
    – It also comes with a chintzy set of wrenches for tightening the nylon-bushing lock nuts that hold the casters to the brackets. Like everything Chinese, the nuts are a metric size.

    Recommended, if your needs are similar to my own.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Elizabeth Byrnes

    Just what I was looking for. I had an old wood table I was using in the garage but it was a bit to high, and wasn’t mobile. I cut the legs down, added adjustable feet and then used these step down wheels. Easy to install, really easy to wheel the table around

    Helpful(0) Unhelpful(0)You have already voted this
  5. Matt

    Complete junk. Installed on a homemade workbench that weighs no more than 200lb. First time i went to put down the wheels the footpedal completely bent. I removed the caster to see if i could straighten it but the entire mounting plate bent as well. Save your money.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Modern-Memories

    So I do not leave negative reviews often however I have no other way to contact the seller. First of all I have followed the instructions to the T and the wheels will not raise to the proper height. Secondly the bolts are already bending and the lever is as well (at the pivot point). The rating is way off, you might as well cut it in half. Additionally since the wheels will not raise up they also do not rotate which makes it nearly impossible to move my work bench.

    ** update : after about a week I still have not herd from anyone for customer support. Also I went ahead and ordered a set from iCore and there is a huge difference. All the metal is thicker, the wheels are bigger, and the wheel mounts are actually parallel to the ground when they lift up.

    Helpful(0) Unhelpful(0)You have already voted this
  7. L Y

    Looks like a good product. It works. Easy to install. Came with a template, easily mark where to place the screws. The only thing is as someone else mentioned before, the screws came with it were not very good quality. Better to use your own screws. I managed to break 2 and left half inside the wood. Also managed to have a few that didn’t fully go in but can’t screw in more as the head losing it’s shape and can’t turn anymore. Unable to upload the pictures unfortunately. Other than that, it’s great. I can move a heavy table by myself.

    Helpful(0) Unhelpful(0)You have already voted this
  8. P. de Greyt

    First off all the product work as advertised, when I got mine it was short three screws no problem, I got lots of those in my shop, but it didn’t help my oppion on the product especially when two of the screws provided broke on me when I installed them. Installing the casters was not to challenging, but if you expect all of the hardware to be there there may be problems,once installed, it does it’s job but the steel is not the best quality one of the casters metal lever bend over on me by just pushing down on them which does take some effort to do, conclusion
    does it work, yes
    Cost effective, somewhat, but you get what you pay for.
    I personally would not recommend this to anyone go and spend some more money on the more expensive ones, but in a pinch or if you are on a tight budget they work, but I don’t think they will last the lifetime of your bench

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    SPACECARE Workbench Stepdown Caster
    SPACECARE Workbench Stepdown Caster

    $34.00

    Premier Handling Solutions
    Logo

    Thank You! We Received Your Form And Will Be Contacting You.

    Contact Information

    Find Us Here:

    Shopping cart