Welcome To Premier Handling Solutions! 1-800-404-2311
- 5%

5″ Swivel Casters Wheels with Screw Safety Dual Locking

(7 customer reviews)


Added to wishlistRemoved from wishlist 0

Specification: 5″ Swivel Casters Wheels with Screw Safety Dual Locking

Package Dimensions

13.23 x 11.69 x 2.72 inches

Item Weight

9.31 pounds

Date First Available

July 24, 2019



  • SCREWS INCLUDE AND HEAVY DUTY:360 degree rotation to facilitate rotation at any angle,Heavy duty: can withstand a single 550lb, a total of 2200lb weight
  • SAFETY:The 4 wheels have brakes,ensuring the safety of people and goods at any time and at any angle
  • CAPACITY:550lbs each. Plate Size:3.74″ (95mm) x 2.6″ (66mm).Hole center to hole center:2.93″ (74.5mm) x 1.8″ (45mm). Mounting hole dimensions: 0.33″ (8.5mm) x 0.46″ (11.9mm)
  • Wheel Dia.:5″ (125mm). Wheel Width: 1.25″ (32mm). Wheel Material: Polyurethane. Overall Height: 6.18″ (157mm
  • WARRANTY:2 years warranty, quality problems, only change, no maintenance

7 reviews for 5″ Swivel Casters Wheels with Screw Safety Dual Locking

4.7 out of 5
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Prime chump

    These are very nice looking casters that do not mark the floor. They are installed on a bar cart that weighs approximately 600 pounds and they seem to have no problem with that load. The only issue I had is that there is very little clearance between the brake and the mounting plate. Due to the design of the bar cart, I had to orient the mounting bolts with the threads facing down. The exposed threaded portion of the bolts had be short enough to fit between the plate and the brake. I was able to add shims to adjust this, but it was an unforeseen step in the installation. Also be aware that the pretty orange tires get dirty very fast.

    Helpful(0) Unhelpful(0)You have already voted this
  2. leeharper

    These are great casters. The feature I love is that they will lock in the swivel position and the rolling position. I put these on my heavy wooden box floor fan and my tool box. Wish I had found these years ago. Highly recommend. They are definitely heavy duty and high quality.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Dave in DooDah

    These casters look nice and will be fine for a table that will weigh about 300#. However, the description says they’ll support 550#. Maybe they will do it, much like the skinny cast iron wheels on the import engine hoists are supposed to be rated for 1000# each at a minimum, but in reality are less rugged than “legit” casters rated for 300#. The wheel on these casters is a very lightweight plastic, so I fully expect that any side loading or impact would cause catastrophic damage to them. Casters from “legit” caster companies that are rated for similar weights are solid steel or at least a more durable material than these. Also the stamped metal used is all very thin. The forked part in which the wheel sits is made of approximately 14 ga steel and the mounting plate, which is half the size of other similarly rated casters and less 1/8″ thick. For the money, they are nice. Just take the 550# rating with a grain (or block) of salt.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Clara Belle Nielsen

    They are sturdy , well built and quiet. Ready a quality piece to be used on everything from my table saw/router table to tool boxes and engine hoist. A very universal wheel for anything in your shop.

    Helpful(0) Unhelpful(0)You have already voted this
  5. B. Volkert

    I put these casters on 3/4″ Plywood platforms under my woodworking machines. Those machines now roll around my garage shop with ease. The locking mechanism works well and secures both the wheel and the swivel.

    My only complaint is that the hardware was too short to use with the 3/4″ plywood. It may have been OK with 1/2″ plywood; but, the machines are heavy and I did not want to take a chance with a failure. I substituted a 1-1/4″ carriage bolt, a washer, and a nut with a nylon insert to prevent loosening over time.

    I’m very happy with the function of the casters; but, I should have looked for something a bit smaller because my tools are now about 7″ taller than they were before and I don’t want to wear elevator shoes or high heals while using them. Think, search, plan, repeat.

    Helpful(0) Unhelpful(0)You have already voted this
  6. hereyago5050

    Great quality but a little hard to unlock. Almost pulled the rubber apart on my boot tip! They roll smooth and lock hard.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Cody Maupin

    Honestly I couldn’t believe it! First I should say that because of what I paid for this complete set of 4 casters, my expectations were pretty low, hopeful at Best. I may seem jaded, but for someone that more than Usually prefers to buy name Brand Quality Products that I know will last, I didn’t have high hopes for this product. To be completely forthright, I was just hoping they were all the same size & close to same height. That may seem weird to some people, but I’ve had some terrible experiences buying “discounted” items that cost quite a bit less than the other brands. So when these casters showed up on my doorstep I was skeptical. The first hint that I may have found a diamond in the rough was the weight of the packaging, that may seem silly but from that alone I knew that these casters weren’t some light weight material that’ll break after a month. Then I opened the box and the colors surprised me again, I wasn’t crazy about the orange wheels when I was considering the purchase, but once I had them in front of me the colors seemed to work & look great. I tested the locking mechanisms before mounting the casters and they seemed to work good, so I decided what the heck and I mounted them on my 4×4’ assembly table. I couldn’t have been more pleased by the ease of assembly also. If I have one fuss at all, it would be the length of bolt they send with the casters, but hey, I was surprised they even came with bolts, so I can’t complain. When I finally decided to write this review was this afternoon when I locked the casters and tried to move the table…if you’ve ever put locking casters on anything you know that even though they claim to be “Locked”, almost every caster moves or slips a little bit, NOT THESE! I couldn’t believe it! I’m 6’2 250lbs and I put my weight behind it and they didn’t budge, not even a little. I decided right then that I needed to share my review. I definitely plan on purchasing more of these and replacing the casters on my other shop stations. Amazing Product for even more amazing price!

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    5″ Swivel Casters Wheels with Screw Safety Dual Locking
    5″ Swivel Casters Wheels with Screw Safety Dual Locking


    Premier Handling Solutions

    Thank You! We Received Your Form And Will Be Contacting You.

    Contact Information

    Find Us Here:

    Shopping cart