Welcome To Premier Handling Solutions! 1-800-404-2311

3” Caster Wheels, Set of 4,Heavy Duty

(8 customer reviews)


Added to wishlistRemoved from wishlist 0

Specification: 3” Caster Wheels, Set of 4,Heavy Duty






Item Weight

‎7.11 pounds

Package Dimensions

‎14.96 x 5.87 x 2.72 inches

Manufacturer Part Number


Special Features


  • 【HIGH QUALITY DUAL LOCKING】Top plate swivel caster wheels with double brake, At the same time, it can brake the rotation direction of the bottom plate and the direction of the wheel forward, which is easy to operate, safe and reliable.
  • 【TWO HARDWARE KITS, EASY INSTALLATION】For the convenience of the customer to install,we offer TWO Hardware Kits for attaching Skileen caster wheels to any surface such as steel, wood, plastic, etc.One kit includes :20 SCREWS and 20 WASHERS ,Another kit includes :20 BOLTS and 20 NUTS .
  • 【MAX FLEXIBILITY, SAFETY and NO NOISE 】3 inch Polyurethane (PU) Swivel caster wheels rotate 360 DEGREES which can turn to any directions, is good for transporting light furniture and displays QUIETLY and safely. Slient,easy to push, save energy, do not hurt the ground, no traces, strong load capacity and no noise.
  • 【HEAVY DUTY BEARINGS】Steel structures body is extremely hard wearing and resistant to dirt,1000 lbs capacity for the pack of 4, strong bearing capacity.DOUBLE BALL BEARING and DUAL LOCKING bring a max loading capacity and safety.A saving of time and labour.
  • 【UNIVERSAL USE】 The wheels can be widely used indoor and outdoor, trolleys, workbench, furniture, shelves and other items commonly found in workshops, garages, kitchens, offices etc.

8 reviews for 3” Caster Wheels, Set of 4,Heavy Duty

4.4 out of 5
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Douglas Payne

    These wheels were exactly what I was looking for. I needed some wheels for a new miter saw stand I was building. I wanted them to be a little more sturdy so I added 2×4 blocks on the bottom and then screwed the casters to these. Make sure when you install them that you leave them close enough to the edge to allow the brake for each to be stepped/locked.

    They move very smoothly and easily for what I need and are large enough to go over small bumps, etc. The brake is perfect because it not only locks the wheel from turning, but also from spinning. When all 4 wheels are locked there is no movement.

    Helpful(0) Unhelpful(0)You have already voted this
  2. Charlie Essendon

    OK – so I was making a portable extension outfeed table for my table saw and needed some heavy duty locking casters. I had already tried some from Harbor Freight but they did not work so I went shopping on Amazon. After viewing these I decided to give them a try but was not expecting the best casters for this price but I was very pleasantly surprised. These casters rock! They are much heavier and smoother rolling over rough floors than anything I have ever purchased – and the locking mechanism is solid and stiff giving positive feedback that the locking brake is engaged. I love these little babies. Totally honest statement – I would not feel bad paying twice the price for these casters – you cannot go wrong here.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Alan Papka

    A perfect four inches from the bottom to the mounting surface. Included hardware is sufficient for just about any application. They lock and unlock relatively easily with no play once engaged. They’ll fit on the ends of laminated 2×4’s or a 4×4 and the included screws will hold em in place.

    The only iffy aspect of these casters is the wheel rubber. It’s smooth, hard and glossy which doesn’t hold the best, especially on a hard floor covered in saw dust. If they were made with rubber like you’d find on a car tire, they’d be perfect.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Lafayette Hatchel

    Purchased these for a router table I’m building. First thing I noticed was the metal stops are pretty flimsy. And the wheels are not bearing incased. I purchased a different brand late last year, they were 6.00 more, probably should have gone that route again. I do not see these holding up nearly as well.
    I would recommend spending a few dollars more and purchasing a higher quality caster.

    Helpful(0) Unhelpful(0)You have already voted this
  5. Travis

    I am honestly surprised how well this product held up after what my particular unit went through. First, the delivery was executed very poorly. The package was left outside under the rain and the packaging was totally ruined, some moisture did get into the casters as well. I was worried it would rust and ruin the ball-bearings but the product was just fine! No squeaks, creaks, or any damage from the water.

    I swapped out my old 2″ casters on my workbench since it was struggling because of the weight. Once I swapped these on, I felt no compromise in the wheels when I forcefully drag or push my bench around my workshop.

    Another huge plus is the hardware provided with the product, I did not have to rumage through spare parts.

    In summary, 5/5! It proved to be corrosion/rust resistant from moisture, and it was very easy to mount and operate.

    Helpful(0) Unhelpful(0)You have already voted this
  6. John Larkin

    I received my Castors and they were exactly the way I’d imagined them would be – roll able. My intentions of their use had always been to place them on the bottom of my Crate FTX120 watt guitar amp. The guitar amp weights approximately 50 pounds. I can lift 50 pounds no problem although at some gigs I have gone to, I’d have to carry this amp upwards to a quarter mile. (Roadies? You’re saying? where is your Roadies? Just a local humble musician I am.) On four sturdy castors, they glide my amp everywhere until I lift the amp onto a stage or into my van. Also, the best part of the castors are, they lock the amp in place! I also like the either or option of fastening screws or bolts and nuts. I decided on the screws because space on the bottom of my amp is limited.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Jim strange

    I just installed the new wheels. We will find out how they wear.
    I am reasonably impressed thus far. The brake lever and mechanism are good, solid metal instead of cheap plastic. They roll very well. I was also impressed they came with both bolts and heavy screws so you can fasten them on in whichever way works best.
    Seems much better quality and better price than what is available at hardware stores or Harbor Freight.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Gremlich

    I’m building a miter station with wings and wanted to be able to easily roll it around when I need it, and fold it up and stick it against the wall when I’m not. So, I ordered these 3″ casters. They came with both bolts and screws for various applications, and it had a couple extra of each in case you lose one (which I am known to do!). Once I got the wheels on and put the miter saw on top it rolled very easily around the garage. Did not take much effort at all. These wheels are great, will definitely order for my next project.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    3” Caster Wheels, Set of 4,Heavy Duty
    3” Caster Wheels, Set of 4,Heavy Duty


    Premier Handling Solutions

    Thank You! We Received Your Form And Will Be Contacting You.

    Contact Information

    Find Us Here:

    Shopping cart