Welcome To Premier Handling Solutions! 1-800-404-2311

2” Caster Wheels, Set of 4, Heavy Duty

(8 customer reviews)

$15.00

Added to wishlistRemoved from wishlist 0
  • 【HIGH QUALITY DUAL LOCKING】Top plate swivel caster wheels with double brake, At the same time, it can brake the rotation direction of the bottom plate and the direction of the wheel forward, which is easy to operate, safe and reliable.
  • 【MAX FLEXIBILITY, SAFETY and NO NOISE 】2 inch Polyurethane (PU) Swivel caster wheels rotate 360 DEGREES which can turn to any directions, is good for transporting light furniture and displays QUIETLY and safely. Slient,easy to push, save energy, do not hurt the ground, no traces, strong load capacity and no noise.
  • 【HEAVY DUTY BEARINGS】Steel structures body is extremely hard wearing and resistant to dirt, 600 lbs capacity for the pack of 4, strong bearing capacity.DOUBLE BALL BEARING and DUAL LOCKING bring a max loading capacity and safety.A saving of time and labour.
  • 【 EASY INSTALLATION】For the convenience of the customer to install,we offer 1 SCREWDRIVER( interchangeable bars ) ,20 MOUNTING SCREWS and 20 STAINLESS WASHERS ,which is enough for installation.
  • 【UNIVERSAL USE】 The wheels can be widely used indoor and outdoor, trolleys, workbench, furniture, shelves and other items commonly found in workshops, garages, kitchens, offices etc.

8 reviews for 2” Caster Wheels, Set of 4, Heavy Duty

5.0 out of 5
8
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Turnhob

    Wow, was not expecting this quality! Nice heavy duty casters. Each has a wheel lock, (so there is no hunting for the one wheel with the lock). The Urethane wheels are very quiet and will not mar your floors. (Much better than hard plastic), and ball bearings make the casters move smootly. I bought these to make a dolly as I am not so young anymore , and can’t carry large objects so easily. Mounting hardware is included as well as a screwdriver. No need for a trip to the hardware store!

    Helpful(0) Unhelpful(0)You have already voted this
  2. Jesse B

    I needed to roll an oven around my garage when not in use (it’s used for powder coating, not baking), and I didn’t like the wooden dolly it was on. I was very concerned about the size/quality of these wheels, and what hardware I would need. Not only was I surprised to see that the wheels are extremely well made, but they came with an abundance of screws and washers and nuts– more than you could ever used for the wheels. The thing now rolls around with one finger, and the locking wheels help keep it in place when need be. Great buy.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Todd

    These wheels a smooth rolling and can turn 360 degrees. I like that it can with a screwdriver and hardware, but ended up using my power drill instead.

    Installation or assembly is easy depending on how you set up the use. I predrilled holes that I used into 2×4’s to make a furniture dolly.

    It helped move lots of boxes and was able to bear heavy loads.

    When I’m done moving I plan to detach these wheels and use it for something else.

    The rubber on the wheels are solid and build quality is strong
    This makes these wheels very versatile.

    Helpful(0) Unhelpful(0)You have already voted this
  4. joey b

    I needed to add wheels to an old tv stand that i wanted to use for a new drill press i just purchased instead of throwing stand away.

    After considering several options, i decided on this set of caster wheels.

    Ordered on the 27th and received on the 29th.

    Wheels came with a screwdriver and all hardware and was able to install in a matter of minutes.

    I put the drill press onto the stand and tested. The stand rolls around easily with no binding. I am able to use the press without any wobbling.

    Each wheel has a step down lever to lock the wheel. I only used 2 of the wheel locks (stand is stored against a wall) and the stand is secure.

    My only concern is the metal seems a little thin (locking lever) but so far so good!

    Works perfectly for my needs and at a great price!!!

    Helpful(0) Unhelpful(0)You have already voted this
  5. Will-Review4U

    I wanted a set of casters for a project that consisted of plywood, pocket screws, drawer glides, and heavy duty casters. This mobile seat and tool cart is for when I am building a DIY project or working on a weekend fix it list in the garage. This cart is great to have a place to sit while you work.
    This four pack of casters was the perfect size at 2 inches with thick but quiet rubber and ball bearings for a smooth glide on the floor. This rolling work seat allows me to work in comfort and still move around easily, plus it offers storage drawers and a small shelf to hold the tools and supplies that I may require.
    I mounted these casters at the corners of the Bottom by drilling pilot holes and then driving in screws. Then, following the seats instructions to install 12″ drawer slides for mounting the drawers. Finally I added a cushion to the top for comfort and attached it with spray adhesive. When this cart is fully loaded with my tools and my 190 pound body sitting, the casters have no problem moving and I can lock with both my palm or foot using the large lever located on the wheel.
    My first tool into this cart was the screwdriver that was included with the casters.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Darling Nikki

    I have a progressive illness that causes me to use a wheelchair. Since I can’t stand at all now, cooking has been very difficult. My husband made me a small kitchen island at the perfect height for a wheelchair user. We decided to add these so I can wheel it out of the way when I am not using it. I was a little concerned that it would be too heavy for the wheels, but they work great. They glide smoothly and it’s easy to apply the brakes. They were easy to install and it includes the needed hardware.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Goge

    Nice quality! As I’ve gotten older (and my back is worse!) I’ve looked for ways to make things easier. Lifting is bad, rolling is good.

    Screwing this set of four wheels on to a scrap piece of 3/4″ plywood with a hole drilled for a rope handle, lets me stand straight.

    It’s almost like anti-gravity! Laundry basket zips down the hall. Groceries glide into the kitchen. You get the idea.

    I can put a plastic crate on top for clean up and go from room to room. The price is lower than pre-made mover platforms, it comes with all screws needed, even a nice Phillips screw driver.

    All four wheels swivel and lock for maneuverability.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Christopher NEILSON

    Likes:
    FAST SHIPPING.

    EXCELLENT BUILD QUALITY.

    WHEEL MATERIAL (SOFT AND QUIET).

    BLACK POWDER COAT (MOST CASTERS ARE JUST PLAIN GALVANIZED METAL COLOR).

    PACKAGING (each caster individually wrapped)

    HARDWARE INCLUDED ( STAINLESS SCREWS AND WASHERS. PLUS A FEW EXTRA).

    DISLIKES:
    SCREW DRIVER INCLUDED (A NICE GESTURE BUT IT IS OF HORRIBLE QUALITY THAT PROBABLY WOULD NOT HAVE LASTED FOR THE 16 SCREWS NEEDED TO INSTALL)

    I WILL BE PURCHASING MORE IN THE NEAR FUTURE FOR SONE OTHER PROJECTS.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    2” Caster Wheels, Set of 4, Heavy Duty
    2” Caster Wheels, Set of 4, Heavy Duty

    $15.00

    Premier Handling Solutions
    Logo

    Thank You! We Received Your Form And Will Be Contacting You.

    Contact Information

    Find Us Here:

    Shopping cart